Marktec Corporation ( Thailand ) Co., Ltd & Marktec Asia Co.,Ltd.

Pipe Marking System (Type-Ⅰ)

01 01 This system performs paint marking characters, symbols and special marks at the designated position of the pipe outside surface in accordance with the data received from host computer.
On the bridge type frame across the pipe transverse transfer table, the marking head is moving along the stopped pipe longitudinally for making.

Features

Fully automatic marking in accordance with the marking data from host computer
Extremely precise marking can be done on stationary pipe
Fast response pencil guns spray clear, sharp and uniform dot marking
Numerals, Alphabets, Symbols and special marks can be marked on full length of pipe
Multi-line marking and parallel marking of several pipes can be done if multiple marking machines are installed

Main Specification
Pipe to be marked	Seamless pipe, ERW pipe
Outer Diameter	More than 27.0 mm
Pipe Condition	Dry, free of water, oil and mill scale Temperature : Normal temperature Bend : Less than 4/1000 mm for total length
Installed Position	Above the transverse transfer table with V-shape holders
Marking Specification	Marking Type : Paint dot spray type Color : White Dot Configuration : 22-dot-matrix Dot Diameter, Pitch : 2.2 mm Kind of Character : Numerals, Alphabets, Symbols, Special fonts and marks
Marking Speed	Max. 45 m/min.
Paint/Remover	Paint : Ecocolor PSG (White) Remover : Ecocolor Remover G
Main Equipment
Mechanical Equipment	Marking Machine : Marking Head (22 dots), Marking Head Case, Nozzle Cleaning Device and others Approx. 300 W x 350 H x 350 L mm
	Pump Unit : Paint Pump, Remover Pump each 1 set Approx. 860 W x 1160 H x 800 D mm
	Frame and Drive Unit : Bridge type frame Drive unit for Marking Machine : X-axis Transverse movement Speed : 750 mm/sec. Z-axis Upward and Downward movement Speed : 280 mm/sec.
Control Equipment	Control Panel, Power Distribution Panel, Driver Panel Main Operation Panel, Local Operation Panel 1 set each