This system is installed above the plate roller transfer table and marks characters, symbols and special marks at the designated position of surface of the plate, while the plate is stopped on the roller table, in accordance with the marking data received from host computer.
Features
- Fully automatic marking in accordance with the marking data from host computer
- Fast response pencil guns spray clear, sharp and uniform dot marking
- 36-dot-matrix dense special marks and fonts can be registered max. 999 kinds
- Extremely precise marking can be done on stationary plate
| Main Specification | |
|---|---|
| Plate to be marked | Heavy Plate |
| Plate Condition | Dry, free of water, oil and mill scale Max. 300 ℃ |
| Installed Position | Above the plate roller transfer table in Plate finishing plant |
| Marking Specification | Marking Type : Paint dot spray type Color : White Dot Configuration : 36-dot-matrix Dot Diameter, Pitch : 5 mm Kind of Character : Numerals, Alphabets, Symbols, Special fonts and marks |
| Paint/Remover | Paint : Tecmarker PMK (White) Remover : Tecmarker Remover PMK |
| Main Equipment | |
|---|---|
| Marking Machine | Marking Head (36 dots), Marking Head Case, Nozzle Cleaning Device and others Approx. 300 W x 500 H x 400 L mm |
| Pump Unit | Paint Pump, Remover Pump each 1 set Approx. 860 W x 1160 H x 800 D mm |
| Marking Control Panel | Print Controller (PC), Sequencer (PLC) Approx. 1600 W x 2000 H x 600 D mm |
| Marking/Servo Driver Panel | Approx. 1200 W x 2000 H x 600 D mm |
| Main Operation Panel | Desk type Approx. 1000 W x 850 D x 800 H mm |
| Frame and Drive Unit | Bridge type frame Drive unit for Marking Machine: X-axis Transverse movement Y-axis Movement of plate longitudinal direction Z-axis Upward and Downward movement W-axis Rotating movement |
Marking Sample
|
Marking Sample1 |
Marking Sample2 |
|---|
