The best selection for a high quality/large size character marking.
Paint Jet Printer PJ-2 performs the marking on the surface of up to 300℃, thus, is the most suitable for the marking of steel plates and coils.
Features
- Distinct dot-matrix marking
- Failure self-diagnosis system
- Early resumption of operation
- Quick-drying of the paint of markings
- High-speed marking：120m/min
| Main Specification | ||
|---|---|---|
| Type | PJ-2 | |
| Type of character | Numerals：10、 Alphabets：26、 Symbols：28 kinds Special letters：Max.200 kinds(can be registered) |
|
| Size of character (H×W mm) |
Nozzle angle 90° | Nozzle angle 45° |
| 61x43 (Min.) | 43x30 (Min.) | |
| 142x106 (Max.) | 100x74 (Max.) | |
| Max. marking speed | 120mpm：Nozzle angle 90° | 85mpm：Nozzle angle 45° |
| Max. number of marking character |
2048 digits (maximum text data receivable) |
|
| Marking distance | 15mm | |
| Communication I/F | Ethernet(TCP/IP) | |
| Electric power supply | AC100-240V（50/60Hz）、single phase、85VA | |
| Air supply | More than 0.7MPa、1.0Nm³/min | |
| Ambient temperature | 0～45℃、without dew formation | |
Machine Arrangement and Character Pattern
 Nozzle angle 90° |
Nozzle angle 45° |
|---|
Marking samples
 Coil |
 Steel Plate |
|---|