HOME Eddy Current Testing Products ECT System Fully Automatic ECT System for Cylinder Block

ECT System for Cylinder Block

ect throughThis eddy current testing system automatically detects a crack on bore part of aluminum cylinder block head, and If a harmful crack is detected, NG paint marking is done on the designated position of the cylinder block.

 






Features

  • Detecting probe does not contact with workpiece, therefore does not wear
  • All directional flaw inspection can be done by one probe
  • Paint shot NG marking on the pipe (Option)
  • In-line automatic ECT system to fit existing production line can be designed
Main Specification
Workpiece to be inspected Cylinder block
Material to be inspected Aluminum alloy
Probe Air floating probe
Flaw Crack (all direction)
Detecting accuracy Min. 0.3 mm depth x 0.2 mm width x 2 mm length artificial flaw
(S/N : more than 3)
Electric power AC200/220 V±10%, 50/60 Hz, 3-phase, approx. 3 KVA
Air 0.4 MPa, more than 0.2 m3/min. (dry)
Normal consumption : approx. 0.05 m3/min.

Movie

※ Click photograph to view movie of ECT System for Cylinder Block

Movie
(1.81MB / 31min.)

Main application

In addition to inspection of cylinder block, this system is applicable for inspection of followings;

  • Surface of disk brake
  • Inside and outside surface of ring parts
  • Inside and outside surface of cylindrical parts